Description

New Dellow Conversions cast aluminium bellhousing couples the Ford Falcon T5 167mm front shaft transmission to the Jaguar 6 cylinder 2.4 3.8 4.2 engine. The T5 gives you the ability to run a much stronger, reliable, tried and proven transmission to your Jaguar. The Ford T5 is ideally suited to the Jaguar due to the overdrive which allows low RPM cruising on the open road.

Other Parts Available:

• Spigot Bush (refer important note below)
• Thrust Race & Carrier – Custom
• Clutch Push Rod – Custom
• Clutch Fork & Clip – Custom
• Clutch Kit – 400bhp – Custom
• New Steel Billet Flywheel (fitment of your ring gear)
• Flywheel & Pressure Plate Bolt Kit
• Transmission Rubber Mount
• Speedo Cable
• Tail Shaft Yoke
• Universal Joint
• Weld Yoke

Conversion Notes:

• The spigot tip of the T5 transmission MUST be machined to O.D 15mm to allow the required wall thickness of the spigot bush
• There are many different T5 transmissions available, so be cautious when buying to select the right one. In our experience the Ford Falcon EA-EL 6-cylinder T5 has the correct shaft length (167mm) and stick position for this vehicle.  For tunnel estimation, transmission height ~270mm. 125mm from shaft centre to top
• The flywheel does not come with a ring gear. The late TH400 type ( 1977 onwards ) original automatic ring gear transfers to the new flywheel. Your flex plate can be supplied to us for fitment to the flywheel.