Products

T5 LAYSHAFT RETAINER – HEAVY DUTY STEEL

$95.00 incl. GST

Description

This new item manufactured by Dellow Conversions replaces the thin metal pressing that holds the layshaft end with taper bearing and reverse idler shaft.

Required when re-building your transmission for higher power engines.

Comes complete with 4 countersunk screws (Loctite should be used with install).

Note – Extra shims may be required (not supplied).

Suitable for all Ford and GMH T5’s (not T5G)

 

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
G
Gareth Harvey (Hobart, Australia)
Good fit, excellent manufacture, needs better packaging and shims

Very well manufactured, excellent fit, the bolt holes were perfectly aligned and 5th gear had just the right amount of clearance.
Aust post beat the hell out of mine, so It needed a bit of sanding to remove the damage. Perhaps a bit of bubble wrap for future deliveries or even a little box maybe?
You'll need a set of shims from a third party. I bought a cheap (Chinese) version off Amazon AU. The Chinese retainer was absolute garbage, but the shims fit fine. When asked Dellows aren't going to start making shims any time soon. So if you're short on time make sure you order your shims in advance or you'll have a disassembled box in the garage for two weeks and a pissed off wife.

j
jason young (Adelaide, Australia)
Must Have according to Paul Cangialosi

I was very surprised to see one in Australia asT5 gear box parts are hard to get hold of, thanks Dellow conversions P.S would you have shifting lugs to suit the T5

P
Paul White (Melbourne, Australia)
T5 counter shaft bearing support

Great product, could use some shims to set the bearing preload as will be needed most times you install the plate.

S
Scott Harrison (Melbourne, Australia)
Heavy Duty T5 Layshaft Retainer

Must have part for strengthening the T5 gearbox.
Great to be able to source these parts local in Australia.

You may also like…