Products

LAND CRUISER 40 – 70 SERIES WITH V8 HOLDEN – BELLHOUSING KIT

  • Bell Housing
  • Spigot Bush
  • Slave Cylinder Mounting Bracket
  • Thrust Race & Carrier
  • Clutch Disc & Pressure Plate (400bhp)
  • Flywheel & Ring Gear
  • Flywheel & Pressure Plate Bolt Kit
  • Engine Mount Brackets (weld-in that suits the factory rubbers)

$2,580.00 incl. GST

SKU: N/A Categories: , Tags: , , , , , , , , , , ,

Description

This highly customised bellhousing kit enables the installation of the Holden V8 into a Toyota Land Cruiser 40 / 60 / 70 Series with a manual 4-bolt gearbox.  This kit is applicable to Land Cruiser’s manufactured from 1973 to 1992, and also the 3F up to about 1996.

Toyota made numerous changes to the vehicle and transmission.  To customise your order we will require transmission information where access is required to the gearbox front shaft, either by removing the engine or the bellhousing.

Conversion Notes

  1. When ordering please specify engine block, Trimatic pattern or Turbo Pattern
  2. The kit is made to use your factory clutch fork, thrust race & carrier and slave cylinder
  3. Bellhousing uses an OEM Dust Cover from 60 / 70 Series Land Cruiser
  4. Does not suit “B” series 4 cylinder Land Cruiser, refer to the “B” series kit for this conversion
  5. IMPORTANT NOTE: Transmission is to be installed with two Dowell Pins

You may also like…